로그인을 해주세요.

제약,식품,화장품 용 HT-110 Online TOC-Analyzer

페이지 정보

profile_image
작성자 최고관리자
댓글 0건 조회 496,729회 작성일 22-05-26 17:26

본문

제품명 HT-110 Online TOC-Analyzer

제품설명


개요

The continuous online TOC-Analyzer HT-110 is suitable for the measurement ot total organic carbons in Purified Water (PW), Water For Injection (WFI) and Highly Purified Water (HPW). The unit is operating according to USP 643. It is applicable for pharmaceutical and/or semiconductor manufacturing. The measuring principle is based on UV-Oxidation and measurement of the difference in conductivity. TOC concentration measurement (TOC concentration 500 ppbC or lower) is necessary to perform quality control according to GMP (Good Manufacturing Practice).

기능

  • UV-Oxidation and conductivity determination: This method eliminates the need for reagents and carrier gases. It delivers an accurate measurement at low concentrations, like for instance in WFI (Water For Injection) areas and reduces the cost of operation at the same time.
  • “Debubbler“ embedded: Bubbles in production systems often cause unstable readings in many instruments. The embedded “Debubbler“ eliminates the influence of air and guarantees a stable measurement.
  • Optional external ON/OFF control of contact input terminals.
  • Maintenance cycle: “ONLY ONCE PER YEAR“: Maintenance only consists of annual UV-lamp exchange and annual calibration.
  • Conforms to: United States Pharmacopeia: USP <643>.
  • Reference solutions for System Suitability Test (SST): 1,4 Benzoquinone and Sucrose
  • Choice of 3 installation methods: Possible to install on a pole, wall or desktop.

제조원 HORIBA Advanced Techno

사양

Model

HT-110

Measurement method

Continuous UV-Oxidation and measurement of difference in conductivity

Measuring range

0 to 1000 ppb
(Measuring range : 0 to 100 / 500 / 1000 ppb)

Display resolution

0 to 100 ppb, 0.1 ppbC

0 to 500 ppb, 0.1 ppbC

0 to 1000 ppb, 1 ppbC

Repeatability

Within ±2% of the full scale

Transmission output

Number of outputs : 1
4 to 20 mA dc / 0 to 1 V dc (option): Input / Output isolated type
Max. load resistance : (4 to 20 mA dc) 600 Ω. Min. load resistance ( 0 to 1 V dc) : 100 kΩ [with option selected].
Analog output range : Freely selectable within the measurement range
Output contents : TOC concentration

Contact output

Number of outputs : 2

* Alarm contact output (RLY1)

  • Contact type : Relay contact, SPST (1c)
  • Contact rating : AC 125 V 3 A, DC 24 V 3 A (resistance load)
  • Contact function : Upper limit action (ON / OFF control)
  • Output contents : Selectable between TOC concentration, Temperature, Conductivity, Hold, and Error (Operation is reversed when Hold or Error is selected)

* Alarm contact output (RLY2)

  • Contact type : Relay contact, SPST (1a)
  • Contact rating : AC 125 V 3 A, DC 24 V 3 A (resistance load)
  • Contact function : Upper limit action (ON / OFF control)
  • Output contents : TOC concentration

Sample conditions

Conductivity : < 10 µS/cm or lower (0 to 100 ppb: < 2 µS/cm or lower)
Temperature : 5 to 99 °C
Pressure : 0.03 MPa to 0.50 MPa
Flow rate : 20 to 200 mL/min

Ambient environment

Temperature : 5 to 40 °C
Humidity : 85% or lower

Display functions

LC with backlight
Display content (TOC concentration, conductivity, temperature, alarm)

Structure

Protection : IP43 ;
Paint color 5PB8/1;
Epoxy coating (indoor-use panel installation type)

Power supply

AC 100 to 240 V ±10% 50/60 Hz 80 VA (max.)

Mass

13 kg

Conforming standards

CE marking, FCC Part 15, USP <643>

브로셔

HT-110 TOC-Analyzer brochure