로그인을 해주세요.

제품정보

하수폐수TMS 총질소 / 총인 자동연속측정기

페이지 정보

profile_image
작성자 최고관리자
댓글 0건 조회 544,482회 작성일 22-05-18 14:41

본문

제품명 총질소 / 총인 자동연속측정기

제품설명


개요

측정기 운영비의 절감, 법적규제와 규정의 적합

60년의 수질계측 노하우 기술로 제작된 최신제품

기능

  • 소비전력※1을 약 30%※2감소하여 운영비용을 절감

  • 전용시약 개발으로 과황산칼륨의 안정성을 향상.

  • 소비전력 약30%감소, 순수·폐수 배출량 1/2
    자동순수장치사용(옵션), 폐수 처리에 필요한 비용(시간 포함)와 환경 부하 저감.(당사 기존모뎅 대비)

  • 오염에 강한 계량 시스템 채택
    당사 기존모델에 적용한 시약 배출량 절감(1/10)을 적용하고 새로운 계량 방식(메니스커스 계량 방식)의 채용과 자동 세척 기능(옵션)의 강화. 점검 주기 연장.

  • 그외

    • 다양한 세척 기능:샘플채수 라인 세척,퍼지 기능, 시약 교환 시 시약라인 세척기능, 샘플라인 자동세척기능※4
    • 고객의 요청에 맞춘 관리메뉴얼을 제공
    • 자외선산화분해법:일본에서 약 60%의 점유율.실적 No.1※5
    • 컬러 터치 패널: 쉬운 디스플레이, 조작성을 향상
    • 부하량 연산 기능 내장
    • USB데이터 출력 포트

       


제조원 HORIBA Advanced Techno

사양

General Specifications

Name

Automatic Total Nitrogen/Phosphorus Monitoring System

Model

TPNA-500

External dimensions*1

460(W) mm×385 mm(D)×1600 mm(H)

Weight

Approx. 90 kg

Power

AC 100 V~240 V±10% 50/60 Hz

Electric power consumption

AC 100 V~240 V: Approx. 250 VA

Performance

Measuring range*2

Total nitrogen: 0~2/5/10/20/50/100/200/500/1000 mgN/L Total phosphorus: 0~0.5/1/2/5/10/20/50/100/250 mgP/L

Repeatability

Within ±3% full scale (Total nitrogen full scale: 50 mgN/L or lower and Total phosphorus full scale: 10 mgP/L or lower) Within ±5% full scale (Total nitrogen full scale: 100~1000 mgN/L and Total phosphorus full scale: 20~250mgP/L) Condition: using standardized solution

Measurement principle

 

Total nitrogen: Alkaline potassium peroxodisulfate UV oxidation ― UV absorption method

Total phosphorus: Potassium peroxodisulfate UV oxidation ― molybdenum blue absorption method

 

Number of measured components

1 point (standard), 2 points (optional)

Number of measuring ranges*3

1 range (standard), 2 ranges (optional)

Measurement interval

60 minutes

Installation environment

Ambient temperature

2~40℃

Ambient humidity

Relative humidity: 85% max. (without condensation)

Ambient environment

Relative humidity: 85% max. (without condensation)

 

Transient overvoltage of main power sorce: Overvoltage category II (IEC60364-44) Pollution level 2 Flat and stable location with minimized vibrations and shocks.

Atmosphere free from dust, mist, corrosive gas, etc.

 

 

Measuring conditions

Sample water conditions*4,5,6,7,8

 

Temperature: 2 to 40℃ (without freezing) 

Flow rate: 0.5 to 5 L/min(when OF-3 or OF-4 is used),  5~20L/min (when OF-30 or OF-40 is used)

 

Pure water Conditions of tap water supply*9

Usage volume Consumption: 43 L/month *This may increase/decrease depending on the measurement range (depends on measurement ranges and the setup of cleaning function) 

Condition: When pure water is supplied by a customer, shoud be JIS K0557 (1998)*10 A2 or higher and should not contain nitrogen or phosphorus compounds

 

When using deionizer, adherence to criteria of tap water in Water Supply Act*11 is required.

Supply method: Fixed water tank (standard), continuous supply via pure water supply system (optional)

Supply pressure: 0.1~0.5MPa 

 

 

Input/output specification 

Analog output

Standard: 4 points, Optional (3 component spec / 2 points spec): 8 points

 

Standard: 4-20mA DC, 0-16mA DC (Default setting is 4-20mA DC. 

On-screen switching to 0-16mA DC is available) Optional: 0-1V DC, 1-5V DC

,p>

 

Standard: TN concentration, TP concentration, TN load, TP load, time flow rate

Optional (three-component spec): COD concentration, COD load, instant concentration of COD

Output contents of COD  vary according to a device condytions.

500 Ω max.

 

 

 

Contact output

Standard: 16 points, Optional (3 component spec / 2 points spec): 22 points

Non voltage contact output

Insulated output

250V AC, 3A / 30V DC, 3A (only 30V DC, 3A are available for “maintenance” contact.)

Meas., Cal., Standby, Maintenance, Synchro. Idle 1, Synchro. Idle 2, Power, etc.

 

Limit warnings (concentration of TP, TN, COD), H.Hi limit warnings (concentration of TP, TN, COD), 

Hi Load Limit warnings  (TP, TN, COD), Sample Lack, No blank water, Reagent Lack, Span solution Lack, Waste water tank full, Total Alarm 1-6, various gauge errors, etc. 

 

 

Analog input

Standard: 1 point, Optional (3 component spec / 2 points spec): 2 points

Standard: 4-20mA DC,  Optional:1-5V DC

Flow signal (full scale setting is available optionally), Concentration of UV/COD monitor

 

Contact input

Standard: 9 points, Optional (3 component spec / 2 points spec): 18 points

Non voltage a contact input (open collector is available)

Insulated type input: common to (-) side

100 Ω max.

26V DC max.

13 mA DC max

Meas. Start, Cal. Start, Cleaning Start,  Modify Date, Line Select, Flow Mainte, Flow Err., Flow Power OFF, Flow No Drain, UV/COD Mainte, UV/COD Err., UV/COD Power OFF,  etc.

 

Functions

Display

LCD color touch panel display

Load calculation

Standard: TP, TN load calculation, Optional: COD, 2 points load calculation

Memory

 

Measurement values(including daily report and time signal): more than 1 year, Number of alarm records: 100,  Number of calibration records: 100, Number of operation records: 100

The data can be exported through USB interface.

Communication

Standard: RS -485, Optional: RS-232C

Communication protocol

Modbus® *12

Printer

Standard (58 mm); with automatic take-up device.

*1_ Compatible with the channel base of former products TPNA-300/PN-100 series (standard)Compatible with the channel base of former products TPNA-300/PN-100 series (standard)
*2_The value of "Total Nitrogen full scale ÷ Total Phosphorous full scale" must be between 0.2 and 100.The value of "Total Nitrogen full scale ÷ Total Phosphorous full scale" must be between 0.2 and 100.
*3_The first range must be low concentrations, and for the same components measured, the value of "the full scale of second ranThe first range must be low concentrations, and for the same components measured, the value of "the full scale of second range ÷ the full scale of first ge ÷ the full scale of first range" must be between 1 and 50. This formula is applicable to both Nitrogen & Phosphorous. This calculation must be of same corange" must be between 1 and 50. This formula is applicable to both Nitrogen & Phosphorous. This calculation must be of same component.mponent.
*4_seawater adjustment function (optional) is available for when seawater is mixed in.A seawater adjustment function (optional) is available for when seawater is mixed in.

*5_Sample line chemical washing function (optional) is also available depending on sample conditions.A sample line chemical washing function (optional) is also available depending on sample conditions.
*6_The auxiliary overflow tank can be installed to the right or left or at the back of the system main body.The auxiliary overflow tank can be installed to the right or left or at the back of the system main body.

*7_The auxiliary overflow tank should be within 1m from the system main body.The auxiliary overflow tank should be within 1m from the system main body.

*8_Sould not contain components that affect measurement such as metal ions.Should not contain components that affect measurement such as metal ions.

*9_When tap water is supplied, make sure to conduct flushing for approximately 30 minutes before introducing tap water into equWhen tap water is supplied, make sure to conduct flushing for approximately 30 minutes before introducing tap water into equipment.ipment.

*10_Without nitrogen or phosphorus compounds, Conductivity: 0.1 mS/cm max., TOC: 0.5 mg/L max. Please consult separately conceWithout nitrogen or phosphorus compounds, Conductivity: 0.1 mS/cm max., TOC: 0.5 mg/L max. Please consult separately concerning pure water rning pure water conditions. 

*11_: TOC : 3 mg/L max., Nitrate-nitrogen: 10 mg/L max., Nitrite-nitrogen: 10 mg/L max. Please consult separately concerning tap wTOC: 3 mg/L max., Nitrate-nitrogen: 10 mg/L max., Nitrite-nitrogen: 10 mg/L max. Please consult separately concerning tap water conditions.ater conditions. 

*12_:Modbus12 Modbus  is a registered trademark of Schneider Automation Inc.is a registered trademark of Schneider Automation Inc.