로그인을 해주세요.

제품정보

환경 UV계 OPSA-150

페이지 정보

profile_image
작성자 최고관리자
댓글 0건 조회 2,171,713회 작성일 22-05-18 15:04

본문

제품명 UV계 OPSA-150

제품설명

개요

호리바의 독자적인 측정 방식을 응용한 새로운 UV탁도계입니다. 수질의 유기물을 측정하는 수질감시나 프로세스 라인중에서의 유기물 모니터등으로 사용할 수 있습니다.

기능

  • 수질의 더러움에 의한 영향을 셀 회전 제로점 체크 방식으로 드리프트가 없습니다.
  • 1대로 0~0.1Abs의 저농도부터 0~5.0Abs의 고농도까지 폭넓은 측정레인지로 측정합니다.
  • 대화식 메뉴로 쉽게 사용가능
  • 데이타 메모리 기능으로 1시간 간격으로 1년치의 데이타를 메모리 할 수 있습니다. 또 CF카르를 사용해서 PC로 데이타를 관리가 가능합니다.
  • 측정 셀 Wiper 세정으로 오염에 의한 오차를 최소화합니다.


사양

Name

Organic Pollutant Monitor

Model name

OPSA-150

Measurement items

UV absorbance, VIS absorbance, Converted COD level, Converted TURB level

Principle

2 light path 2 wavelength cell length modulation

Measurement wavelength

UV: 253.7 nm, VIS: 546.1 nm

Construction of analysis section

Rotary type

Range (Equivalent to a cell length of 10 mm)

UV absorbance / VIS absorbance
0 to 0.1 Abs - 0 to 5.0 Abs (Can be set 0.1 Abs increments)

Resolution

0.0001 Abs (Can be set to 0.001 Abs)

Repeatability

Within ±2% of full scale (within ±5% if full scale is 2.6 to 5.0 Abs)

Linearity

Within ±2% of full scale (within ±5% if full scale is 2.6 to 5.0 Abs)

Stability

Within ±2% of full scale in 24 hours (within ±4% in 24 hours if full scale is 2.6 to 5.0 Abs)

Response time

T 90 within 1 minute (flow rate of 5 L/min)

Cleaning method (cleaning cycle)

Automatic cleaning via wipers (continuous cleaning)

Display methods

 

LCD display: 320 x 240 monochrome crystal display with backlight (touch panel type)
Display details: UV absorbance, VIS absorbance, UV-VIS absorbance (Absorbance can be changed to absorption constant (SAC: m-1), Converted COD level, Converted turbidity level

Calibration method

Solution calibration (calibration solution inserted in ampule) via zero solution, span solution (single touch calibration)

Sample conditions

Temperature

2 to 40°C*

Sample flow rate

Minimum 2 L/min, Maximum 20 L/min

*Use a heating device to prevent sample freezing.

Ambient conditions

Ambient temperature: 0 to 40°C, Ambient humidity: 85% or less

Analog output

No. of outputs

3 outputs (standard)

Type

Up to 3 can be chosen from UV absorbance, VIS absorbance, UV-VIS absorbance, Converted COD level, and Converted TURB level outputs

Specification

DC 4 - 20 mA, or DC 0 - 16 mA, isolated output (no isolation between each channel), maximum resistance load: 600Ω

Alarm and status outputs

 

No. of outputs

6 outputs (standard)

Type

Up to 4 can be chosen from power failure, maintenance (standard and fixed), batch alarm, COD maximum limit alarm, TURB limit alarm (standard), light source error, sample failure, cleaning motor error, and analyzer error outputs

Details

Power failure...occurs when power fails Total alarm...cleaning motor error, light source error, analyzer error Maintenance...occurs when entering maintenance or correction mode, or when the maintenance switch has been turned on

Specification

Dry contact output, NO contact
Contact rating: AC 125 V 0.3 A, DC 30V 1 A (with resistance load) Each output has an independent COM interface

Contact input

No. of inputs

2 inputs (standard)

Type

Sample failure float switch input, time correction input

Specifications

No-voltage contact input (can connect to open collector), isolated input
On resistance: Maximum 100Ω, Open voltage: DC 26 V, Short circuit current: 13 mA

Communication

Interface: RS-232C Compatible Communication speed: 19200 bps

Data memory

Values of measurement items are stored in the main unit"s data memory. Data can also be transferred to a Compact Flash card.

Memory interval

1 minute or 1 hour

Memory save time

Every hour*

Data memory capacity

1 minute intervals0 for 10 day"s data, 1 hour intervals0 for 1 year" s data

*The most recent data is saved to memory.

Light source / Detector

Light source: Low pressure mercury lamp / Detector: Silicon photo cell

Tubing connections

Sample entry

Rp-1/2 socket

Overflow outlet (1)

13 A nominal diameter socket

Bypass outlet

Rc-1/2 socket

Drain outlet

50 A nominal diameter socket

Overflow outlet (2)

20 A nominal diameter socket

Drain outlet

Rc-1/2 socket

Construction

For outdoor installation

Material of parts in contact with sample

SUS, PVC, PP, CR, SiO2

Power source

AC 100 V to AC 230 V ±10%, 50/60 Hz

Power consumption

AC 100 V to AC 120 V: 45 VA maximum AC 200 V to AC 230 V: 60 VA maximum

Weight

Operating section: Approx. 5.0 kg Analyzer section: Approx. 5.6 kg

External dimensions

Operating section

240 (W) x 105 (D) x 320 (H)

Analyzer section

200 (W) x 180 (D) x 404 (H) (units: mm) (excludes protruding sections)

Color/Finish

Munsell 5PB8/1

Installation conditions

• Install on a flat stable surface away from sources of vibration and shocks.
• Ambient air must not contain dust, mist or corrosive gases.
• Use at atmospheric pressure.
• Out of direct sunlight.
• An area with good air circulation.
• An altitude of less than 2000 m.